home turbo_sys dyno catalog customer_gallery team news contact_us about_us order_info faq

Electrical Parts

Digital Shift Light - MSD

Part # 116 001
$244.00

Shift Light - Dynatek

Part # 116 002-1
$69.99

The Shift Minder System consists of an attractive billet aluminum Shift Light and the Shift Minder Control Module. The Dyna Shift Light is a hallmark of the quality, reliability and innovation that Dynatek strives to include in every product. Machined billet aluminum with an attractive black and gold anodized finish contribute to a custom rugged appearance.

Shift Minder System - Dynatek

Part # 116 002-2
$200.00

The Dyna Shift Minder System is the ultimate in racing shift light products. The Shift Minder System consists of an attractive billet aluminum Shift Light and the Shift Minder Control Module. The Dyna Shift Light is a hallmark of the quality, reliability and innovation that Dynatek strives to include in every product. Machined billet aluminum with an attractive black and gold anodized finish contribute to a custom rugged appearance.

Air Fuel Ratio Monitor

Part # 116 003
$275.00
When it comes to tuning a turbo engine, there is no better, or safer, way to do so than with a good quality air/fuel ratio system. When the need for information is turbo related, it must be fast and accurate. We tested many sensors and gauges and found this very accurate system, which is fast enough to catch a bad air/fuel ratio before it causes damage. It displays digitally via 10 LED lights to show you exact air/fuel ratio. Also included is a red warning or event based light, excellent for low fuel or oil pressure, or event based to verify NOS system activation.

MSD SB-6

Part # 116 004
$581.50

MSD Blaster Motorcycle Coil

Part # 116 005
$89.99

The MSD Motorcycle coil is specially designed to be used with MSD's MC-1, MC-2, MC-3 and MC-4 ignitions. The Blaster coil uses a high turns ratio with low primary side resistance producing the highest voltage and spark energy available. The molded-in socket style towers are spaced far apart to prevent arc-over.
Output Voltage: 40 KV, Primary Resistance: 1.2 Ohms, Turn Ratio: 100:1

MSD Wires

Part # 116 006
$56.60

MSD MC-3 Ignition

Part # 116 007
$719.99

- For 1, 2 or 4 cylinder engines
- Quicker throttle response, less plug fouling
- Built-in Soft Touch Rev Control
- Built-in Two-Step
- Air shifter ignition interrupt
Whether you have a street, touring or race bike, the powerful sparks of the MSD MC-3 Ignition will improve your motorcycle’s overall driveability through complete combustion of the fuel mixture.

MSD MC-4 Ignition

Part # 116 008
$735.00

*For use with single or dual spark plugs
*1,2 or 4 cylinder selectable
Computer interface for easy programming
*Optional hand held programmer for quick changes
*Optional handle bar mounted launch RPM Selector
*Optional tester will test all options
*0-25 degree start retard
*Mapable run timing curve
*Launch Ramp Delay by time 0 - 2.5 seconds
*Three step retards by RPM or Switch
*0 - 2.50 Second Step Retard off delay for precise nitrous control
*Progressive timing retard by time for progressive NOS
*Launch Timing Curve to prevent tire slippage
*Individual cylinder timing when optional cam sync sensor is used
*Gear Retard - Retard a different amount for each gear
*Shift Kill feature with programmable delays 20-99 milliseconds
*Shift Kill Modes for Manual, Auto 1, 2 and Auto 1, 2, 3
*Optional Boost Retard curve when used with an external MAP sensor for turbo applications (2 - 45 psi)
*Built in RPM Activated Window Switch - Turn "On" any device up to 3 amps at any rpm then back off at a different RPM
*Sequential Shift Light - Turn on an optional shift light at a diff. rpm for ea. gear
*Sequential Shifter - turns any air shifter into a fully automatic shifter
*Tach Output wire for tachometers or data recorders
*Monitor Mode for easy set up of three step switches

Auxilary Fan - Low Profile

Part # 116 009
$95.00

Timing Retard Eliminator (TRE)

TREPart # 116 010
$110.00

Power Commander Ignition Module

Ignition ModulePart # 116 020
$355.00

The Ignition Module uses “direct coil driver technology” and allows a high degree of timing adjustment. In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM. It is also possible to alter the timing for each cylinder individually if necessary.

Dynojet Quick Shifter

Quick ShifterPart # 116 022
$266.47

The Dynojet Quick Shifter (DQS) allows full throttle, clutch less shifting. This is done by momentarily cutting the fuel and or ignition, which unloads the transmission. During this time, the rider can shift up to the next gear without rolling off the throttle or using the clutch.

Dynojet Ignition Quick Shifter

Ignition Quick ShiftPart # 116 023
$315.00

This is a stand alone universal Ignition Quick Shifter module. This unit allows any vehicle with 4 cylinders or less (motorcycle, ATV, mini sprint, etc.) to have quick shifter functionality without the need for a Power Commander. It comes with "coil cap" style connectors for easy installation on most late model motorcycles. For applications that do not have this style of coil the connectors can be removed and the unit hard wired in.

Dynojet LCD Display Unit for Power Commander

LCD Display UnitPart # 116 024
$299.99

The LCD Display connects to any Power Commander USB (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.

Dynojet Multi-Function Hub for Power Commander

HubPart # 116 026 & 116 027
$124.99 (Hub Only)
$189.99 (Hub with Wires)

The Multi-Function Hub allows users to access advanced expansion features. Several optional harnesses are available to permit both input and output to/from the module. Connecting the optional Map Selection Switch allows the rider to switch between two different maps within the Power Commander. For Touring Bikes this could be used to switch between a "fuel economy map" for long rides and a "full performance map".

Wide Band Commander Module

Wide Band Commander ModulePart # 116 028
$329.00

The central brain for analyzing your air-to-fuel ratio. Wiring harness includes connectors for the Multi-Function cable, Power cable, RPM Connector and Gauge Connector. A USB Port provides an instant, no-hassle way to connect the module to a computer.

Spark Plugs

Spark PlugsPart# 116 255
$2.50/ea



Printable Catalog (.pdf file)